diff --git a/boards/sensebox_samd21/Makefile b/boards/sensebox_samd21/Makefile
new file mode 100644
index 0000000000000000000000000000000000000000..f8fcbb53a06595771dae356338a7bf2c0673734d
--- /dev/null
+++ b/boards/sensebox_samd21/Makefile
@@ -0,0 +1,3 @@
+MODULE = board
+
+include $(RIOTBASE)/Makefile.base
diff --git a/boards/sensebox_samd21/Makefile.dep b/boards/sensebox_samd21/Makefile.dep
new file mode 100644
index 0000000000000000000000000000000000000000..5472bf8b8d8fd463a18815c0f10e5d348f90fe51
--- /dev/null
+++ b/boards/sensebox_samd21/Makefile.dep
@@ -0,0 +1,3 @@
+ifneq (,$(filter saul_default,$(USEMODULE)))
+ USEMODULE += saul_gpio
+endif
diff --git a/boards/sensebox_samd21/Makefile.features b/boards/sensebox_samd21/Makefile.features
new file mode 100644
index 0000000000000000000000000000000000000000..2ff2d543e24e0b5c0d3259b518270bd7444bd444
--- /dev/null
+++ b/boards/sensebox_samd21/Makefile.features
@@ -0,0 +1,12 @@
+# Put defined MCU peripherals here (in alphabetical order)
+FEATURES_PROVIDED += periph_gpio
+FEATURES_PROVIDED += periph_i2c
+FEATURES_PROVIDED += periph_rtc
+FEATURES_PROVIDED += periph_spi
+FEATURES_PROVIDED += periph_timer
+FEATURES_PROVIDED += periph_uart
+
+# The board MPU family (used for grouping by the CI system)
+FEATURES_MCU_GROUP = cortex_m0_2
+
+-include $(RIOTCPU)/samd21/Makefile.features
diff --git a/boards/sensebox_samd21/Makefile.include b/boards/sensebox_samd21/Makefile.include
new file mode 100644
index 0000000000000000000000000000000000000000..e9aaa4ec5a37638f8a2d3fc77340f4f0797a7715
--- /dev/null
+++ b/boards/sensebox_samd21/Makefile.include
@@ -0,0 +1,26 @@
+# define the cpu used by SenseBox board
+export CPU = samd21
+export CPU_MODEL = samd21g18a
+
+#export needed for flash rule
+export PORT_LINUX ?= /dev/ttyACM0
+export PORT_DARWIN ?= $(firstword $(sort $(wildcard /dev/tty.usbmodem*)))
+
+# setup serial terminal
+include $(RIOTMAKE)/tools/serial.inc.mk
+
+# setup the flash tool used
+ifeq ($(PROGRAMMER),jlink)
+ # in case J-Link is attached to SWD pins, use a plain CPU memory model
+ export JLINK_DEVICE := atsamd21
+ include $(RIOTMAKE)/tools/jlink.inc.mk
+else
+ # by default, we use BOSSA to flash this board to take into account the
+ # pre-flashed Arduino bootloader. ROM_OFFSET skips the space taken by
+ # such bootloader.
+ ROM_OFFSET ?= 0x2000
+ include $(RIOTMAKE)/tools/bossa.inc.mk
+endif
+
+# setup the boards dependencies
+include $(RIOTBOARD)/$(BOARD)/Makefile.dep
diff --git a/boards/sensebox_samd21/board.c b/boards/sensebox_samd21/board.c
new file mode 100644
index 0000000000000000000000000000000000000000..890ffb32c29523882c46952a0bcbce1e45a399b0
--- /dev/null
+++ b/boards/sensebox_samd21/board.c
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2018 HAW Hamburg
+ *
+ * This file is subject to the terms and conditions of the GNU Lesser
+ * General Public License v2.1. See the file LICENSE in the top level
+ * directory for more details.
+ */
+
+/**
+ * @ingroup boards_sensebox_samd21
+ * @{
+ *
+ * @file
+ * @brief Board specific implementations for the SenseBox MCU with SAMD21
+ * board.
+ *
+ * @author Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
+ * @}
+ */
+
+#include "cpu.h"
+#include "board.h"
+#include "periph/gpio.h"
+
+void board_init(void)
+{
+ /* initialize the CPU */
+ cpu_init();
+
+ /* initialize the on-board red LED on pin PA27 */
+ gpio_init(LED0_PIN, GPIO_OUT);
+
+ /* initialize the on-board green LED on pin PA28 */
+ gpio_init(LED1_PIN, GPIO_OUT);
+
+ /* initialize the on-board button on pin PA20 */
+ gpio_init(BTN0_PIN, BTN0_MODE);
+
+ /* initialize XBEE1 bus enable pin */
+ gpio_init(XBEE1_EN_PIN, XBEE1_EN_MODE);
+
+ /* enable XBEE1 bus */
+ XBEE1_ENABLE;
+
+ /* initialize XBEE2 bus enable pin */
+ gpio_init(XBEE2_EN_PIN, XBEE2_EN_MODE);
+
+ /* enable XBEE2 bus */
+ XBEE2_ENABLE;
+
+ /* initialize I2C bus enable pin */
+ gpio_init(I2C_EN_PIN, I2C_EN_MODE);
+
+ /* enable I2C bus */
+ I2C_ENABLE;
+
+ /* delay for SPI reset. Read README.md for more information. */
+ for (unsigned i = 0; i < WAIT_FOR_SPI_RESET; i++) {
+ __asm__("nop");
+ }
+}
diff --git a/boards/sensebox_samd21/doc.txt b/boards/sensebox_samd21/doc.txt
new file mode 100644
index 0000000000000000000000000000000000000000..de85e8f4ec02f56cce6cb90aff40766d519645c8
--- /dev/null
+++ b/boards/sensebox_samd21/doc.txt
@@ -0,0 +1,56 @@
+/**
+ * @defgroup boards_sensebox_samd21 SenseBox MCU with SAMD21
+ * @ingroup boards
+ * @brief Support for the SenseBox MCU with SAMD21 board.
+
+### General information
+
+[SenseBox](https://www.sensebox.de/) is a do-it-yourself kit for stationary
+and mobile sensor stations.
+
+SenseBox board is based on the Atmel SAMD21G18A microcontroller. See
+@ref cpu_samd21.
+
+
+### Flash the board
+
+1. Put the board in bootloader mode by double tapping the reset button.<br/>
+ When the board is in bootloader mode, the user led (red) oscillates smoothly.
+
+
+2. Use `BOARD=sensebox` with the `make` command.<br/>
+ Example with `hello-world` application:
+```
+ make BOARD=sensebox_samd21 -C examples/hello-world flash
+```
+
+### Accessing STDIO via UART
+
+To access the STDIO of RIOT, a FTDI to USB converted needs to be plugged to
+the UART/Serial 1 pins on the board.
+
+### On I2C port
+I2C port is enabled by default. To disable it use ```I2C_DISABLE```. To
+re-enable use ```I2C_ENABLE```.
+
+### On XBEE ports
+XBEE1 and XBEE2 ports are enabled by default. To disable any of them use
+```XBEEn_DISABLE```. To re-enable use ```XBEEn_ENABLE```.
+
+On the board there is a reset circuit for this ports that delays the reset
+signal from the enable signal for about 300ms. Because of that a delay has
+been introduced in the ```board_init``` function, so that any SPI device
+connected to the ports is reset before use.
+
+#### SX127X radio
+The pin configuration for the SX127X radio on the
+*boards/sensebox/include/board.h** file assumes that it will be connected to
+the XBEE1 port. If a different configuraion is needed please modify this
+file.
+
+#### SD card
+The pin configuration for the mSD-Bee module radio on the
+*boards/sensebox/include/sdcard_spi_params.h** file assumes that it will be
+connected to the XBEE2 port. If a different configuraion is needed please
+modify this file.
+ */
\ No newline at end of file
diff --git a/boards/sensebox_samd21/include/board.h b/boards/sensebox_samd21/include/board.h
new file mode 100644
index 0000000000000000000000000000000000000000..7235d566f8bca09aae40564a955e3f0090c5d609
--- /dev/null
+++ b/boards/sensebox_samd21/include/board.h
@@ -0,0 +1,171 @@
+/*
+ * Copyright (C) 2018 HAW Hamburg
+ *
+ * This file is subject to the terms and conditions of the GNU Lesser
+ * General Public License v2.1. See the file LICENSE in the top level
+ * directory for more details.
+ */
+
+/**
+ * @ingroup boards_sensebox_samd21
+ * @brief Support for the SenseBox MCU with SAMD21 board.
+ *
+ * @{
+ *
+ * @file
+ * @brief Board specific configuration for the SenseBox MCU with SAMD21
+ * board.
+ *
+ * @author Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
+ */
+
+#ifndef BOARD_H
+#define BOARD_H
+
+#include "cpu.h"
+#include "periph_conf.h"
+#include "periph_cpu.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @name LED pin definitions and handlers
+ * @{
+ */
+#define LED0_PIN GPIO_PIN(PA, 27)
+
+#define LED_PORT PORT->Group[PA]
+#define LED0_MASK (1 << 27)
+
+#define LED0_ON (LED_PORT.OUTSET.reg = LED0_MASK)
+#define LED0_OFF (LED_PORT.OUTCLR.reg = LED0_MASK)
+#define LED0_TOGGLE (LED_PORT.OUTTGL.reg = LED0_MASK)
+
+#define LED1_PIN GPIO_PIN(PA, 28)
+#define LED1_MASK (1 << 28)
+
+#define LED1_ON (LED_PORT.OUTSET.reg = LED1_MASK)
+#define LED1_OFF (LED_PORT.OUTCLR.reg = LED1_MASK)
+#define LED1_TOGGLE (LED_PORT.OUTTGL.reg = LED1_MASK)
+/** @} */
+
+/**
+ * @name SW0 (Button) pin definitions
+ * @{
+ */
+#define BTN0_PORT PORT->Group[PA]
+#define BTN0_PIN GPIO_PIN(PA, 20)
+#define BTN0_MODE GPIO_IN_PU
+/** @} */
+
+/**
+ * @name XBEE1 bus
+ * @brief XBEE1 is enabled by default. The enable pin is
+ * 'XBEE1_EN_PIN'. To disable this bus call 'XBEE1_DISABLE', to re-enable it
+ * call 'XBEE1_ENABLE'.
+ * @{
+ */
+#define XBEE1_EN_PORT PORT->Group[PB]
+#define XBEE1_EN_MASK (1 << 3)
+#define XBEE1_EN_MODE GPIO_OUT
+#define XBEE1_EN_PIN GPIO_PIN(PB, 3)
+
+#define XBEE1_ENABLE (XBEE1_EN_PORT.OUTCLR.reg = XBEE1_EN_MASK)
+#define XBEE1_DISABLE (XBEE1_EN_PORT.OUTSET.reg = XBEE1_EN_MASK)
+
+#define XBEE1_CS_PIN GPIO_PIN(PA, 18)
+
+#define XBEE1_INT_PIN GPIO_PIN(PA, 21)
+/** @} */
+
+/**
+ * @name XBEE2 bus
+ * @brief XBEE2 is enabled by default. The enable pin is
+ * 'XBEE2_EN_PIN'. To disable this bus call 'XBEE2_DISABLE', to re-enable it
+ * call 'XBEE2_ENABLE'.
+ * @{
+ */
+#define XBEE2_EN_PORT PORT->Group[PB]
+#define XBEE2_EN_MASK (1 << 10)
+#define XBEE2_EN_PIN GPIO_PIN(PB, 10)
+#define XBEE2_EN_MODE GPIO_OUT
+
+#define XBEE2_ENABLE (XBEE2_EN_PORT.OUTCLR.reg = XBEE2_EN_MASK)
+#define XBEE2_DISABLE (XBEE2_EN_PORT.OUTSET.reg = XBEE2_EN_MASK)
+
+#define XBEE2_CS_PIN GPIO_PIN(PA, 14)
+
+#define XBEE2_INT_PIN GPIO_PIN(PA, 15)
+/** @} */
+
+/**
+ * @name I2C bus
+ * @brief I2C is enabled by default. The enable pin is
+ * 'I2C_EN_PIN'. To disable this bus call 'I2C_DISABLE', to re-enable it call
+ * 'I2C_ENABLE'.
+ * @{
+ */
+#define I2C_EN_PORT PORT->Group[PB]
+#define I2C_EN_MASK (1 << 11)
+#define I2C_EN_PIN GPIO_PIN(PB, 11)
+#define I2C_EN_MODE GPIO_OUT
+
+#define I2C_ENABLE (I2C_EN_PORT.OUTSET.reg = I2C_EN_MASK)
+#define I2C_DISABLE (I2C_EN_PORT.OUTCLR.reg = I2C_EN_MASK)
+/** @} */
+
+/**
+ * @name SX127X
+ *
+ * SX127X configuration (on XBEE1 port). This particular board has
+ * merged DIO0 and DIO1 interupt pins into one (defined as DIOMULTI).
+ * @{
+ */
+#define SX127X_PARAM_SPI (SPI_DEV(0))
+
+#define SX127X_PARAM_SPI_NSS XBEE1_CS_PIN /* D23 */
+
+#define SX127X_PARAM_RESET GPIO_UNDEF
+
+#define SX127X_PARAM_DIOMULTI XBEE1_INT_PIN /* D24 */
+
+#define SX127X_PARAM_PASELECT (SX127X_PA_RFO)
+
+#define SX127X_PARAMS { .spi = SX127X_PARAM_SPI, \
+ .nss_pin = SX127X_PARAM_SPI_NSS, \
+ .reset_pin = SX127X_PARAM_RESET, \
+ .dio0_pin = SX127X_PARAM_DIOMULTI,\
+ .dio1_pin = SX127X_PARAM_DIO1, \
+ .dio2_pin = SX127X_PARAM_DIO2, \
+ .dio3_pin = SX127X_PARAM_DIO3, \
+ .paselect = SX127X_PARAM_PASELECT }
+/** @} */
+
+/**
+ * @brief Delay to wait for SPI reset
+ */
+#define WAIT_FOR_SPI_RESET (3000000UL)
+
+/**
+ * @brief HDC1000 Temperature & Humidity sensor
+ */
+#define HDC1000_PARAM_ADDR (0x40)
+
+/**
+ * @brief TSL2561 Visible light sensor
+ */
+#define TSL2561_PARAM_ADDR TSL2561_ADDR_LOW
+
+/**
+ * @brief Initialize board specific hardware, including clock, LEDs and std-IO
+ */
+void board_init(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* BOARD_H */
+/** @} */
diff --git a/boards/sensebox_samd21/include/gpio_params.h b/boards/sensebox_samd21/include/gpio_params.h
new file mode 100644
index 0000000000000000000000000000000000000000..50b2afcd7cc50d8e9c159760d33c1ad19f9c2ef2
--- /dev/null
+++ b/boards/sensebox_samd21/include/gpio_params.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2018 HAW Hamburg
+ *
+ * This file is subject to the terms and conditions of the GNU Lesser
+ * General Public License v2.1. See the file LICENSE in the top level
+ * directory for more details.
+ */
+
+/**
+ * @ingroup boards_sensebox_samd21
+ * @{
+ *
+ * @file
+ * @brief Board specific configuration of direct mapped GPIOs
+ *
+ * @author Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
+ */
+
+#ifndef GPIO_PARAMS_H
+#define GPIO_PARAMS_H
+
+#include "board.h"
+#include "saul/periph.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @brief GPIO pin configuration
+ */
+static const saul_gpio_params_t saul_gpio_params[] =
+{
+ {
+ .name = "LED(Red)",
+ .pin = LED0_PIN,
+ .mode = GPIO_OUT
+ },
+ {
+ .name = "LED(Green)",
+ .pin = LED1_PIN,
+ .mode = GPIO_OUT
+ },
+ {
+ .name = "BTN",
+ .pin = BTN0_PIN,
+ .mode = BTN0_MODE
+ }
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* GPIO_PARAMS_H */
+/** @} */
diff --git a/boards/sensebox_samd21/include/periph_conf.h b/boards/sensebox_samd21/include/periph_conf.h
new file mode 100644
index 0000000000000000000000000000000000000000..eb754234bcdcf5a09c1aaf8342f1d5be08955e6a
--- /dev/null
+++ b/boards/sensebox_samd21/include/periph_conf.h
@@ -0,0 +1,194 @@
+/*
+ * Copyright (C) 2018 HAW Hamburg
+ *
+ * This file is subject to the terms and conditions of the GNU Lesser
+ * General Public License v2.1. See the file LICENSE in the top level
+ * directory for more details.
+ */
+
+/**
+ * @ingroup boards_sensebox_samd21
+ * @{
+ *
+ * @file
+ * @brief Configuration of CPU peripherals for SenseBox MCU with SAMD21
+ *
+ * @author Jose Alamos <jose.alamos@haw-hamburg.de>
+ * @author Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
+ */
+
+#ifndef PERIPH_CONF_H
+#define PERIPH_CONF_H
+
+#include <stdint.h>
+
+#include "cpu.h"
+#include "periph_cpu.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @name External oscillator and clock configuration
+ *
+ * For selection of the used CORECLOCK, we have implemented two choices:
+ *
+ * - usage of the PLL fed by the internal 8MHz oscillator divided by 8
+ * - usage of the internal 8MHz oscillator directly, divided by N if needed
+ *
+ *
+ * The PLL option allows for the usage of a wider frequency range and a more
+ * stable clock with less jitter. This is why we use this option as default.
+ *
+ * The target frequency is computed from the PLL multiplier and the PLL divisor.
+ * Use the following formula to compute your values:
+ *
+ * CORECLOCK = ((PLL_MUL + 1) * 1MHz) / PLL_DIV
+ *
+ * NOTE: The PLL circuit does not run with less than 32MHz while the maximum PLL
+ * frequency is 96MHz. So PLL_MULL must be between 31 and 95!
+ *
+ *
+ * The internal Oscillator used directly can lead to a slightly better power
+ * efficiency to the cost of a less stable clock. Use this option when you know
+ * what you are doing! The actual core frequency is adjusted as follows:
+ *
+ * CORECLOCK = 8MHz / DIV
+ *
+ * NOTE: A core clock frequency below 1MHz is not recommended
+ *
+ * @{
+ */
+#define CLOCK_USE_PLL (1)
+
+#if CLOCK_USE_PLL
+/* edit these values to adjust the PLL output frequency */
+#define CLOCK_PLL_MUL (47U) /* must be >= 31 & <= 95 */
+#define CLOCK_PLL_DIV (1U) /* adjust to your needs */
+#define CLOCK_CORECLOCK (((CLOCK_PLL_MUL + 1) * 1000000U) / CLOCK_PLL_DIV)
+#else
+/* edit this value to your needs */
+#define CLOCK_DIV (1U)
+/* generate the actual core clock frequency */
+#define CLOCK_CORECLOCK (8000000 / CLOCK_DIV)
+#endif
+/** @} */
+
+/**
+ * @name Timer peripheral configuration
+ * @{
+ */
+#define TIMER_NUMOF (2U)
+#define TIMER_0_EN 1
+#define TIMER_1_EN 1
+
+/* Timer 0 configuration */
+#define TIMER_0_DEV TC3->COUNT16
+#define TIMER_0_CHANNELS 2
+#define TIMER_0_MAX_VALUE (0xffff)
+#define TIMER_0_ISR isr_tc3
+
+/* Timer 1 configuration */
+#define TIMER_1_DEV TC4->COUNT32
+#define TIMER_1_CHANNELS 2
+#define TIMER_1_MAX_VALUE (0xffffffff)
+#define TIMER_1_ISR isr_tc4
+/** @} */
+
+/**
+ * @name UART configuration
+ * @{
+ */
+static const uart_conf_t uart_config[] = {
+ {
+ .dev = &SERCOM3->USART,
+ .rx_pin = GPIO_PIN(PA, 23),
+ .tx_pin = GPIO_PIN(PA, 22),
+ .mux = GPIO_MUX_C,
+ .rx_pad = UART_PAD_RX_1,
+ .tx_pad = UART_PAD_TX_0,
+ .flags = UART_FLAG_NONE,
+ .gclk_src = GCLK_CLKCTRL_GEN_GCLK0,
+ },
+ {
+ .dev = &SERCOM4->USART,
+ .rx_pin = GPIO_PIN(PB, 9),
+ .tx_pin = GPIO_PIN(PB, 8),
+ .mux = GPIO_MUX_D,
+ .rx_pad = UART_PAD_RX_1,
+ .tx_pad = UART_PAD_TX_0,
+ .flags = UART_FLAG_NONE,
+ .gclk_src = GCLK_CLKCTRL_GEN_GCLK0,
+ }
+};
+
+/* interrupt function name mapping */
+#define UART_0_ISR isr_sercom3
+#define UART_1_ISR isr_sercom4
+
+#define UART_NUMOF (sizeof(uart_config) / sizeof(uart_config[0]))
+/** @} */
+
+/**
+ * @name SPI configuration
+ * @{
+ */
+static const spi_conf_t spi_config[] = {
+ {
+ .dev = &SERCOM1->SPI,
+ .miso_pin = GPIO_PIN(PA, 19),
+ .mosi_pin = GPIO_PIN(PA, 16),
+ .clk_pin = GPIO_PIN(PA, 17),
+ .miso_mux = GPIO_MUX_C,
+ .mosi_mux = GPIO_MUX_C,
+ .clk_mux = GPIO_MUX_C,
+ .miso_pad = SPI_PAD_MISO_3,
+ .mosi_pad = SPI_PAD_MOSI_0_SCK_1
+ }
+};
+
+#define SPI_NUMOF (sizeof(spi_config) / sizeof(spi_config[0]))
+
+/**
+ * @name I2C configuration
+ * @{
+ */
+static const i2c_conf_t i2c_config[] = {
+ {
+ .dev = &(SERCOM0->I2CM),
+ .speed = I2C_SPEED_NORMAL,
+ .scl_pin = GPIO_PIN(PA, 8),
+ .sda_pin = GPIO_PIN(PA, 9),
+ .mux = GPIO_MUX_C,
+ .gclk_src = GCLK_CLKCTRL_GEN_GCLK0,
+ .flags = I2C_FLAG_NONE
+ },
+ {
+ .dev = &(SERCOM2->I2CM),
+ .speed = I2C_SPEED_NORMAL,
+ .scl_pin = GPIO_PIN(PA, 12),
+ .sda_pin = GPIO_PIN(PA, 13),
+ .mux = GPIO_MUX_C,
+ .gclk_src = GCLK_CLKCTRL_GEN_GCLK0,
+ .flags = I2C_FLAG_NONE
+ }
+};
+
+#define I2C_NUMOF (sizeof(i2c_config) / sizeof(i2c_config[0]))
+
+/**
+ * @name RTC configuration
+ * @{
+ */
+#define RTC_NUMOF (1U)
+#define RTC_DEV RTC->MODE2
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* PERIPH_CONF_H */
+/** @} */
diff --git a/boards/sensebox_samd21/include/sdcard_spi_params.h b/boards/sensebox_samd21/include/sdcard_spi_params.h
new file mode 100644
index 0000000000000000000000000000000000000000..9de34e8cd32064a26ee93dc43b0b65a07f44c18f
--- /dev/null
+++ b/boards/sensebox_samd21/include/sdcard_spi_params.h
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2018 HAW Hamburg
+ *
+ * This file is subject to the terms and conditions of the GNU Lesser
+ * General Public License v2.1. See the file LICENSE in the top level
+ * directory for more details.
+ */
+
+/**
+ * @ingroup boards_sensebox_samd21
+ * @{
+ *
+ * @file
+ * @brief SD card configuration for SenseBox MCU with SAMD21 board. This
+ * configuration
+ * considers that SD is connected to the XBEE2 port.
+ *
+ * @author Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
+ */
+
+#ifndef SDCARD_SPI_PARAMS_H
+#define SDCARD_SPI_PARAMS_H
+
+#include "board.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @brief Card detect pin
+ */
+ #define CARD_DETECT_PIN (XBEE2_INT_PIN)
+
+/**
+ * @brief sdcard_spi configuration
+ */
+static const sdcard_spi_params_t sdcard_spi_params[] = {
+ {
+ .spi_dev = SPI_DEV(0),
+ .cs = XBEE2_CS_PIN,
+ .clk = GPIO_PIN(PA, 17),
+ .mosi = GPIO_PIN(PA, 16),
+ .miso = GPIO_PIN(PA, 19),
+ .power = GPIO_UNDEF,
+ .power_act_high = true
+ },
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* SDCARD_SPI_PARAMS_H */
+/** @} */
diff --git a/examples/lua_REPL/Makefile b/examples/lua_REPL/Makefile
index cacf10fbcc06eb0d784cdb48a57955a960c51868..90bcaf8304cf02fc4a1fa34c11f605ef294b4b34 100644
--- a/examples/lua_REPL/Makefile
+++ b/examples/lua_REPL/Makefile
@@ -18,12 +18,12 @@ BOARD_INSUFFICIENT_MEMORY := bluepill calliope-mini cc2650-launchpad \
b-l072z-lrwan1 cc2538dk ek-lm4f120xl feather-m0 \
ikea-tradfri limifrog-v1 mbed_lpc1768 nrf6310 \
nucleo-f091rc nucleo-l073rz nz32-sc151 \
- openmote-cc2538 openmote-b pba-d-01-kw2x \
+ openmote-cc2538 openmote-b pba-d-01-kw2x \
remote-pa remote-reva remote-revb samd21-xpro \
saml21-xpro samr21-xpro seeeduino_arch-pro \
- slstk3401a sltb001a slwstk6220a sodaq-autonomo \
- sodaq-explorer sodaq-one stk3600 stm32f3discovery \
- yunjia-nrf51822
+ sensebox_samd21 slstk3401a sltb001a slwstk6220a \
+ sodaq-autonomo sodaq-explorer sodaq-one stk3600 \
+ stm32f3discovery yunjia-nrf51822
BOARD_BLACKLIST := arduino-duemilanove arduino-mega2560 arduino-uno \
chronos hifive1 jiminy-mega256rfr2 mega-xplained mips-malta \
diff --git a/tests/unittests/Makefile b/tests/unittests/Makefile
index 0ca0d3457e19ebdc62542a4356d72d4f65f9da25..63615bf8c742d3e06c432fb4210de06aa16c4fd7 100644
--- a/tests/unittests/Makefile
+++ b/tests/unittests/Makefile
@@ -58,6 +58,7 @@ BOARD_INSUFFICIENT_MEMORY := airfy-beacon \
samd21-xpro \
samr21-xpro \
seeeduino_arch-pro \
+ sensebox_samd21 \
slstk3401a \
sltb001a \
slwstk6220a \