Xen requires explicit image format specification.

Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

Fixed the following abort when build was running mkzfs.py.

Done!
eth0: ethernet address: 52:54:0:12:34:56
[I/20 dhcp]: Waiting for IP...
[I/26 dhcp]: Server acknowledged IP for interface eth0
[I/26 dhcp]: Configuring eth0: ip 192.168.122.15 subnet mask 255.255.255.0
gateway 192.168.122.1
Aborted

Signed-off-by: David Leifker <dlei...@gmail.com>
Signed-off-by: Avi Kivity <avi@cloudius-systems.com>

In libc.h there was an optimization which disabled locking when there
is only one thread. It was using 'threads_minus_1' field from struct
__libc. In OSv this field was always 0, so there was no locking.

It was causing memory corruption when running apache benchmark against
tomcat in OSv on SMP. This patch makes them go away.

The fix is to always lock as in OSv we always have more than one
thread.

Signed-off-by: Tomasz Grabiec <tgrabiec@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

Attempt to reassign IP for lo0 fails and leaves it without an address.

This breaks tomcat:

  SEVERE: StandardServer.await: create[localhost:8005]:
  java.net.BindException: Address not available

Signed-off-by: Tomasz Grabiec <tgrabiec@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

Saves a bit of manual work.

Example:

  gdb$ osv info threads
  0 (0x1de9e08) cpu0x0 waiting    sched::thread::join() at core/sched.cc (SNIP)
	joining on 0xffffc0003e41e010

Signed-off-by: Tomasz Grabiec <tgrabiec@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

Xen guests do not support user mode networking.
Fall back to qemu when hypervisor detection used and no external
networking configured.

This logic is required for build to support Xen hosts properly.

Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

This patch adds to support multiple NIC initialization on loader.cc.

Signed-off-by: Takuya ASADA <syuu@dokukino.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

Dead code, and boost::signals2::signal<> does the job better.

Signed-off-by: Avi Kivity <avi@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

It's preferable to use equal_range() to do VMA lookups so drop the
unused find_vma() function.

Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

Replace magic numbers with constants for CR0 and CR4 control register
values in arch/x86/boot.S.

Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

This prevented the script to work on tmpfs.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

Signed-off-by: Tomasz Grabiec <tgrabiec@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

As of commit 31fee0fa ("build: Build images as QCOW2 files.") we no
longer build raw images.

Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

condvar_wait() expects an absolute time, not a duration.

Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

The ACPI subsystem uses the memory allocator a lot so enable the debug
allocator before initializing it to detect boot-time problems.

Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

Fill newly allocated memory with a well known pattern (byte, byte+1,
byte+2, ...) to catch uses of uninitialized memory.

Signed-off-by: Avi Kivity <avi@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

We create a memory_image and assign it to _core before *this is fully
initialized, triggering corruption in program::_module_index_list.

This fixes memory corruption issues seen with the upcoming demand paging
patches.

Signed-off-by: Avi Kivity <avi@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

Make use of the python nbd client.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Avi Kivity <avi@cloudius-systems.com>

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Avi Kivity <avi@cloudius-systems.com>

This fixes 'osv info threads' command.

when $rsp holds 0xffffc0003fdf6fc8, ulong() for gdb.Value representing
it returns 18446673706036981704. This is out of int range. This
causes that thread_context.__exit__() throws "Numeric constant too
large" exception from

  set $rbp = 18446673706036981704

The fix removes the additional conversion as it seems to be
unnecessary. The gdb.Value should format itself properly.

Signed-off-by: Tomasz Grabiec <tgrabiec@cloudius-systems.com>
Signed-off-by: Avi Kivity <avi@cloudius-systems.com>

Spanning tree causes the bridge port to start in listening mode.
That causes dhcp packet to be ignored. Since we're not fearing of
layer2 loops, we can safely remove the spanning tree config.

Signed-off-by: Dor Laor <dor@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

Add the explanation by Avi Kivity to AcpiOsUnmapMemory() to explain why
it's a no-op.

Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>
Signed-off-by: Avi Kivity <avi@cloudius-systems.com>

The script supports 3 modes of operation:
  - public release (default) for official releases
  - private release - for internal testing
  - development instance - for development

Public release means AMI created public (visible to everyone) and replicated
over all existing Amazon regions.

Private release means AMI created private (visible to releaser's account only) and
not replicated over regions.

Development instance means no AMI created, script stops after instance creation.

The script's help screen (--help command line parameter) provides detailed information
about script interface, dependencies and configurations required.

It's interesting to note that each public release made by this script costs about 20 USD
mainly because of AMI replication over Amazon regions

Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

Due to incorrect mapping logic ACPI tables longer than PAGE_SIZE
mapped partially and to wrong base address. As a result system crashed
on ACPI tables checksum verification.

Found when running on EC2 HVM instances, the problematic table was:
ACPI: DSDT 0xfc002c40 0321F (v02    Xen      HVM 00000000 INTL 20090220)

Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>

slop made page size by default because this is the most frequent case

Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>

If we do, we'll have extra xen threads running around for no reason in the !xen
case. is_xen() should already work here since the initializers are run after
cpuid discovery, which is when the information for is_xen is filled up.

Signed-off-by: Glauber Costa <glommer@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

Fix the following breakage caused by commit c98b928e ("Explicitly use python
version number") when starting GDB:

  Traceback (most recent call last):
    File "/home/penberg/osv/scripts/loader.py", line 833, in <module>
      setup_libstdcxx()
    File "/home/penberg/osv/scripts/loader.py", line 496, in setup_libstdcxx

Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

Ironically, my commit 0c77d3c2 broke xen_features initialization.
This patch fixes it.

Reported-by: Avi Kivity <avi@cloudius-systems.com>
Signed-off-by: Raphael S. Carvalho <raphael.scarv@gmail.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

Consolidates generated files, and makes it easier to maintain the eclipse
index.

Signed-off-by: Avi Kivity <avi@cloudius-systems.com>

Currently all log messages are silently ignored,
which is probably not what we want.

The default JDK config logs on console.

Signed-off-by: Tomasz Grabiec <tgrabiec@cloudius-systems.com>

I dismissed the idea to configure the bridge in default JVM
configuration because having a default like this would force
all apps to use particular slf4j-api version.

Signed-off-by: Tomasz Grabiec <tgrabiec@cloudius-systems.com>

Signed-off-by: Tomasz Grabiec <tgrabiec@cloudius-systems.com>

Makes this go away:

  Note: io/osv/OsvSystemClassLoader.java uses unchecked or unsafe
  operations.  Note: Recompile with -Xlint:unchecked for details.

Unfortunately javac does not recognize statement level suppressions
like this:

  //noinspection unchecked
  return (T) method.invoke(target, args);

I need to switch to more coarse grained suppression on method level:

  @SuppressWarnings("unchecked")

Signed-off-by: Tomasz Grabiec <tgrabiec@cloudius-systems.com>

Switch to Markdown syntax in README. I did the minimal amount of changes
to make the rendering on Github look sane. We can prettify it even more
later.

Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

It is needed for systems where python points to python3

Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

The code wouldn't work if XENFEAT_NR_SUBMAPS > 1. It's currently 1.
The assignment to xen_features must take i as well as j into consideration.

Signed-off-by: Raphael S. Carvalho <raphael.scarv@gmail.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

Use the initialization sequence specified in 10.1.2.2 ("ACPICA
Initialization With Early ACPI Table Access") from ACPICA reference
manual.

Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

Use mmu:isreadable() to actually check if a memory region is readable in
AcpiOsReadable().

Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

Fix the following issues with the debug version of realloc():

  - Make realloc with NULL ptr behave like malloc()

  - Make realloc with non-NULL pointer and zero size behave like free()

  - Avoid malloc() if we have enough space in original memory block

  - Return NULL if the new allocation fails but don't deallocate the
    original memory block

Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>