drivers: use I2C_DEV(x) instead of deprecated I2C_x

tests/driver_bmp180/Makefile

@@ -6,7 +6,7 @@ USEMODULE += xtimer
 USEMODULE += printf_float
 
 # set default device parameters in case they are undefined
-TEST_I2C                  ?= I2C_0
+TEST_I2C                  ?= I2C_DEV\(0\)
 TEST_MEASURE_OVERSAMPLING ?= BMP180_ULTRALOWPOWER
 TEST_ALTITUDE             ?= 158 # altitude in Polytechnique School campus
 

tests/driver_hdc1000/Makefile

@@ -7,7 +7,7 @@ USEMODULE += hdc1000
 USEMODULE += xtimer
 
 # set default device parameters in case they are undefined
-TEST_HDC1000_I2C  ?= I2C_0
+TEST_HDC1000_I2C  ?= I2C_DEV\(0\)
 TEST_HDC1000_ADDR ?= 0x43
 
 # export parameters

tests/driver_hih6130/Makefile

@@ -7,7 +7,7 @@ USEMODULE += hih6130
 USEMODULE += xtimer
 
 # set default device parameters in case they are undefined
-TEST_HIH6130_I2C  ?= I2C_0
+TEST_HIH6130_I2C  ?= I2C_DEV\(0\)
 TEST_HIH6130_ADDR ?= 0x27
 
 # export parameters

tests/driver_ina220/Makefile

@@ -7,7 +7,7 @@ USEMODULE += ina220
 USEMODULE += xtimer
 
 # set default device parameters in case they are undefined
-TEST_INA220_I2C  ?= I2C_0
+TEST_INA220_I2C  ?= I2C_DEV\(0\)
 TEST_INA220_ADDR ?= 0x40
 
 # export parameters

tests/driver_isl29020/Makefile

@@ -7,7 +7,7 @@ USEMODULE += isl29020
 USEMODULE += xtimer
 
 # set default device parameters in case they are undefined
-TEST_ISL29020_I2C  ?= I2C_0
+TEST_ISL29020_I2C  ?= I2C_DEV\(0\)
 TEST_ISL29020_ADDR ?= 68
 
 # export parameters

tests/driver_isl29125/Makefile

@@ -7,7 +7,7 @@ USEMODULE += isl29125
 USEMODULE += xtimer
 
 # set default device parameters in case they are undefined
-TEST_ISL29125_I2C     ?= I2C_0
+TEST_ISL29125_I2C     ?= I2C_DEV\(0\)
 TEST_ISL29125_IRQ_PIN ?= GPIO_PIN\(0,0\)
 
 # export parameters

tests/driver_l3g4200d/Makefile

@@ -7,7 +7,7 @@ USEMODULE += l3g4200d
 USEMODULE += xtimer
 
 # set default device parameters in case they are undefined
-TEST_L3G4200D_I2C  ?= I2C_0
+TEST_L3G4200D_I2C  ?= I2C_DEV\(0\)
 TEST_L3G4200D_ADDR ?= 104
 TEST_L3G4200D_INT  ?= GPIO_PIN\(0,0\)
 TEST_L3G4200D_DRDY ?= GPIO_PIN\(0,1\)

tests/driver_lis3mdl/Makefile

@@ -13,7 +13,7 @@ ifneq (,$(TEST_LIS3MDL_I2C))
 	CFLAGS += -DTEST_LIS3MDL_I2C=$(TEST_LIS3MDL_I2C)
 else
 	# set random default
-	CFLAGS += -DTEST_LIS3MDL_I2C=I2C_1
+	CFLAGS += -DTEST_LIS3MDL_I2C=I2C_DEV\(1\)
 endif
 ifneq (,$(TEST_LIS3MDL_MAG_ADDR))
 	CFLAGS += -DTEST_LIS3MDL_MAG_ADDR=$(TEST_LIS3MDL_MAG_ADDR)

tests/driver_lps331ap/Makefile

@@ -7,7 +7,7 @@ USEMODULE += lps331ap
 USEMODULE += xtimer
 
 # set default device parameters in case they are undefined
-TEST_LPS331AP_I2C  ?= I2C_0
+TEST_LPS331AP_I2C  ?= I2C_DEV\(0\)
 TEST_LPS331AP_ADDR ?= 92
 
 # export parameters

tests/driver_lsm303dlhc/Makefile

@@ -13,7 +13,7 @@ ifneq (,$(filter iotlab-m3,$(BOARD)))
 endif
 
 # set default device parameters in case they are undefined
-TEST_LSM303DLHC_I2C      ?= I2C_0
+TEST_LSM303DLHC_I2C      ?= I2C_DEV\(0\)
 TEST_LSM303DLHC_ACC_ADDR ?= 25
 TEST_LSM303DLHC_MAG_ADDR ?= 30
 TEST_LSM303DLHC_ACC_PIN  ?= GPIO_PIN\(0,0\)

tests/driver_mag3110/Makefile

@@ -7,7 +7,7 @@ USEMODULE += mag3110
 USEMODULE += xtimer
 
 # set default device parameters in case they are undefined
-TEST_MAG3110_I2C           ?= I2C_0
+TEST_MAG3110_I2C           ?= I2C_DEV\(0\)
 TEST_MAG3110_ADDR          ?= 0x0E
 TEST_MAG3110_USER_OFFSET_X ?= -2000
 TEST_MAG3110_USER_OFFSET_Y ?= 180

tests/driver_mma8652/Makefile

@@ -7,7 +7,7 @@ USEMODULE += mma8652
 USEMODULE += xtimer
 
 # set default device parameters in case they are undefined
-TEST_MMA8652_I2C           ?= I2C_0
+TEST_MMA8652_I2C           ?= I2C_DEV\(0\)
 TEST_MMA8652_ADDR          ?= 0x1D
 TEST_MMA8652_USER_OFFSET_X ?= 0
 TEST_MMA8652_USER_OFFSET_Y ?= 0

tests/driver_mpl3115a2/Makefile

@@ -7,7 +7,7 @@ USEMODULE += mpl3115a2
 USEMODULE += xtimer
 
 # set default device parameters in case they are undefined
-TEST_MPL3115A2_I2C  ?= I2C_0
+TEST_MPL3115A2_I2C  ?= I2C_DEV\(0\)
 TEST_MPL3115A2_ADDR ?= 0x60
 
 # export parameters

tests/driver_mpu9150/Makefile

@@ -14,7 +14,7 @@ ifneq (,$(filter msbiot,$(BOARD)))
 endif
 
 # set default device parameters in case they are undefined
-TEST_I2C       ?= I2C_0
+TEST_I2C       ?= I2C_DEV\(0\)
 TEST_HW_ADDR   ?= MPU9150_HW_ADDR_HEX_68
 TEST_COMP_ADDR ?= MPU9150_COMP_ADDR_HEX_0C
 

tests/driver_srf02/Makefile

@@ -8,7 +8,7 @@ USEMODULE += srf02
 USEMODULE += shell
 
 # set default device parameters in case they are undefined
-TEST_SRF02_I2C ?= I2C_0
+TEST_SRF02_I2C ?= I2C_DEV\(0\)
 TEST_MODE      ?= SRF02_MODE_REAL_CM
 
 # export parameters

tests/driver_srf08/Makefile

@@ -7,7 +7,7 @@ USEMODULE += xtimer
 USEMODULE += srf08
 
 # set default device parameters in case they are undefined
-export TEST_SRF08_I2C   ?= I2C_0
+export TEST_SRF08_I2C   ?= I2C_DEV\(0\)
 export TEST_SRF08_SPEED ?= I2C_SPEED_NORMAL
 export TEST_MODE        ?= SRF08_MODE_CM
 export TEST_NUM_ECHOS   ?= 3

tests/driver_tcs37727/Makefile

@@ -7,7 +7,7 @@ USEMODULE += tcs37727
 USEMODULE += xtimer
 
 # set default device parameters in case they are undefined
-TEST_TCS37727_I2C  ?= I2C_0
+TEST_TCS37727_I2C  ?= I2C_DEV\(0\)
 TEST_TCS37727_ADDR ?= 0x29
 
 # export parameters

tests/driver_tmp006/Makefile

@@ -7,7 +7,7 @@ USEMODULE += tmp006
 USEMODULE += xtimer
 
 # set default device parameters in case they are undefined
-TEST_TMP006_I2C       ?= I2C_0
+TEST_TMP006_I2C       ?= I2C_DEV\(0\)
 TEST_TMP006_ADDR      ?= 0x41
 TEST_TMP006_CONFIG_CR ?= TMP006_CONFIG_CR_DEF