boards: slwstk6000b: add support

boards/slwstk6000b/Makefile

+MODULE = board
+
+DIRS = $(RIOTBOARD)/common/silabs
+
+include $(RIOTBASE)/Makefile.base

boards/slwstk6000b/Makefile.dep

+ifneq (,$(filter saul_default,$(USEMODULE)))
+  USEMODULE += saul_gpio
+  USEMODULE += si7021
+endif
+
+# include board common dependencies
+include $(RIOTBOARD)/common/silabs/Makefile.dep
+
+include $(RIOTCPU)/efm32/Makefile.dep

boards/slwstk6000b/Makefile.features

+# Put defined MCU peripherals here (in alphabetical order)
+FEATURES_PROVIDED += periph_adc
+FEATURES_PROVIDED += periph_gpio
+FEATURES_PROVIDED += periph_i2c
+FEATURES_PROVIDED += periph_rtc
+FEATURES_PROVIDED += periph_rtt
+FEATURES_PROVIDED += periph_spi
+FEATURES_PROVIDED += periph_timer
+FEATURES_PROVIDED += periph_uart
+
+# The board MPU family (used for grouping by the CI system)
+FEATURES_MCU_GROUP = cortex_m4_2
+
+-include $(RIOTCPU)/efm32/Makefile.features

boards/slwstk6000b/Makefile.include

+include $(RIOTBOARD)/slwstk6000b/module-info.mk
+
+# add module specific includes
+export INCLUDES += -I$(RIOTBOARD)/slwstk6000b/modules/$(BOARD_MODULE)/include
+
+# define the cpu used by SLWSTK6000B
+export CPU = efm32
+export CPU_MODEL = $(MODULE_CPU)
+
+# set default port depending on operating system
+PORT_LINUX ?= /dev/ttyACM0
+PORT_DARWIN ?= $(firstword $(sort $(wildcard /dev/tty.usbmodem*)))
+
+# setup serial terminal
+include $(RIOTMAKE)/tools/serial.inc.mk
+
+# setup JLink for flashing
+export JLINK_DEVICE := $(MODULE_JLINK_DEVICE)
+include $(RIOTMAKE)/tools/jlink.inc.mk
+
+# add board common drivers
+USEMODULE += boards_common_silabs
+USEMODULE += silabs_aem
+USEMODULE += silabs_bc
+
+# include board common
+include $(RIOTBOARD)/common/silabs/Makefile.include

boards/slwstk6000b/board.c

+/*
+ * Copyright (C) 2015-2018 Freie Universität Berlin
+ *
+ * This file is subject to the terms and conditions of the GNU Lesser
+ * General Public License v2.1. See the file LICENSE in the top level
+ * directory for more details.
+ */
+
+/**
+ * @ingroup     boards_slwstk6000b
+ * @{
+ *
+ * @file
+ * @brief       Board specific implementations SLWSTK6000B board
+ *
+ * @author      Hauke Petersen <hauke.petersen@fu-berlin.de>
+ * @author      Bas Stottelaar <basstottelaar@gmail.com>
+ *
+ * @}
+ */
+
+#include "board.h"
+#include "board_common.h"
+#include "periph/gpio.h"
+
+void board_init(void)
+{
+    /* initialize the CPU */
+    cpu_init();
+
+    /* perform common board initialization */
+    board_common_init();
+
+#ifdef MODULE_SI7021
+    /* initialize the Si7021 sensor */
+    gpio_init(SI7021_EN_PIN, GPIO_OUT);
+    gpio_set(SI7021_EN_PIN);
+#endif
+}

boards/slwstk6000b/include/board.h

+/*
+ * Copyright (C) 2015-2018 Freie Universität Berlin
+ *
+ * This file is subject to the terms and conditions of the GNU Lesser
+ * General Public License v2.1. See the file LICENSE in the top level
+ * directory for more details.
+ */
+
+/**
+ * @defgroup    boards_slwstk6000b Silicon Labs SLWSTK6000B starter kit
+ * @ingroup     boards
+ * @brief       Support for the Silicon Labs SLWSTK6000B starter kit
+ * @{
+ *
+ * @file
+ * @brief       Board specific definitions for the SLWSTK6000B starter kit
+ *
+ * @author      Hauke Petersen <hauke.petersen@fu-berlin.de>
+ * @author      Bas Stottelaar <basstottelaar@gmail.com>
+ * @author      Kai Beckmann <kai.beckmann@hs-rm.de>
+ */
+
+#ifndef BOARD_H
+#define BOARD_H
+
+#include "cpu.h"
+#include "periph_conf.h"
+#include "periph/gpio.h"
+#include "periph/spi.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @name    Xtimer configuration
+ *
+ * The timer runs at 250 KHz to increase accuracy.
+ * @{
+ */
+#define XTIMER_HZ           (250000UL)
+#define XTIMER_WIDTH        (16)
+/** @} */
+
+/**
+ * @name    Board controller configuration
+ *
+ * Define the GPIO pin to enable the BC, to allow serial communication
+ * via the USB port.
+ * @{
+ */
+#define BC_PIN              MODULE_PIN_F5
+/** @} */
+
+/**
+ * @name    Push button pin definitions
+ * @{
+ */
+#define PB0_PIN             MODULE_PIN_F12
+#define PB1_PIN             MODULE_PIN_F13
+/** @} */
+
+/**
+ * @name    LED pin definitions
+ * @{
+ */
+#define LED0_PIN            MODULE_PIN_F10
+#define LED1_PIN            MODULE_PIN_F11
+/** @} */
+
+/**
+ * @name    Macros for controlling the on-board LEDs
+ * @{
+ */
+#define LED0_ON             gpio_set(LED0_PIN)
+#define LED0_OFF            gpio_clear(LED0_PIN)
+#define LED0_TOGGLE         gpio_toggle(LED0_PIN)
+#define LED1_ON             gpio_set(LED1_PIN)
+#define LED1_OFF            gpio_clear(LED1_PIN)
+#define LED1_TOGGLE         gpio_toggle(LED1_PIN)
+/** @} */
+
+/**
+ * @name    Display configuration
+ *
+ * Connection to the on-board Sharp Memory LCD (LS013B7DH03).
+ * @{
+ */
+#define DISP_SPI            SPI_DEV(0)
+#define DISP_COM_PIN        MODULE_PIN_F18
+#define DISP_CS_PIN         MODULE_PIN_F17
+#define DISP_EN_PIN         MODULE_PIN_F14
+/** @} */
+
+/**
+ * @name    Temperature sensor configuration
+ *
+ * Connection to the on-board temperature/humidity sensor (Si7021).
+ * @{
+ */
+#define SI7021_I2C              I2C_DEV(0)
+#define SI7021_EN_PIN           MODULE_PIN_P37
+
+#define SI70XX_PARAM_I2C_DEV    SI7021_I2C
+/** @} */
+
+/**
+ * @brief   Initialize the board (GPIO, sensors, clocks).
+ */
+void board_init(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* BOARD_H */
+/** @} */

boards/slwstk6000b/include/gpio_params.h

+/*
+ * Copyright (C) 2016-2017 Bas Stottelaar <basstottelaar@gmail.com>
+ *
+ * This file is subject to the terms and conditions of the GNU Lesser
+ * General Public License v2.1. See the file LICENSE in the top level
+ * directory for more details.
+ */
+
+/**
+ * @ingroup     boards_slwstk6000b
+ * @{
+ *
+ * @file
+ * @brief       Board specific configuration of direct mapped GPIOs
+ *
+ * @author      Bas Stottelaar <basstottelaar@gmail.com>
+ */
+
+#ifndef GPIO_PARAMS_H
+#define GPIO_PARAMS_H
+
+#include "board.h"
+#include "saul/periph.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @brief    GPIO pin configuration
+ */
+static const  saul_gpio_params_t saul_gpio_params[] =
+{
+    {
+        .name = "LED 0",
+        .pin = LED0_PIN,
+        .mode = GPIO_OUT
+    },
+    {
+        .name = "LED 1",
+        .pin = LED1_PIN,
+        .mode = GPIO_OUT
+    },
+    {
+        .name = "Button 1",
+        .pin = PB0_PIN,
+        .mode = GPIO_IN_PU,
+        .flags = SAUL_GPIO_INVERTED
+    },
+    {
+        .name = "Button 2",
+        .pin = PB1_PIN,
+        .mode = GPIO_IN_PU,
+        .flags = SAUL_GPIO_INVERTED
+    }
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* GPIO_PARAMS_H */
+/** @} */

boards/slwstk6000b/include/periph_conf.h

+/*
+ * Copyright (C) 2015-2018 Freie Universität Berlin
+ *
+ * This file is subject to the terms and conditions of the GNU Lesser
+ * General Public License v2.1. See the file LICENSE in the top level
+ * directory for more details.
+ */
+
+/**
+ * @ingroup     boards_slwstk6000b
+ * @{
+ *
+ * @file
+ * @brief       Configuration of CPU peripherals for the SLWSTK6000B starter kit
+ *
+ * @author      Hauke Petersen <hauke.petersen@fu-berlin.de>
+ * @author      Bas Stottelaar <basstottelaar@gmail.com>
+ * @author      Kai Beckmann <kai.beckmann@hs-rm.de>
+ */
+
+#ifndef PERIPH_CONF_H
+#define PERIPH_CONF_H
+
+#include "cpu.h"
+#include "periph_cpu.h"
+#include "em_cmu.h"
+#include "board_module.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @brief   Internal macro to calculate *_NUMOF based on config.
+ */
+#define PERIPH_NUMOF(config)    (sizeof(config) / sizeof(config[0]))
+
+/**
+ * @name    Clock configuration
+ * @{
+ */
+#ifndef CLOCK_HF
+#define CLOCK_HF            cmuSelect_HFXO
+#endif
+#ifndef CLOCK_CORE_DIV
+#define CLOCK_CORE_DIV      cmuClkDiv_1
+#endif
+#ifndef CLOCK_LFA
+#define CLOCK_LFA           cmuSelect_LFRCO
+#endif
+#ifndef CLOCK_LFB
+#define CLOCK_LFB           cmuSelect_LFRCO
+#endif
+#ifndef CLOCK_LFE
+#define CLOCK_LFE           cmuSelect_LFRCO
+#endif
+/** @} */
+
+/**
+ * @name    ADC configuration
+ * @{
+ */
+static const adc_conf_t adc_config[] = {
+    {
+        .dev = ADC0,
+        .cmu = cmuClock_ADC0,
+    }
+};
+
+static const adc_chan_conf_t adc_channel_config[] = {
+    {
+        .dev = 0,
+        .input = adcPosSelTEMP,
+        .reference = adcRef1V25,
+        .acq_time = adcAcqTime8
+    },
+    {
+        .dev = 0,
+        .input = adcPosSelAVDD,
+        .reference = adcRef5V,
+        .acq_time = adcAcqTime8
+    }
+};
+
+#define ADC_DEV_NUMOF       PERIPH_NUMOF(adc_config)
+#define ADC_NUMOF           PERIPH_NUMOF(adc_channel_config)
+/** @} */
+
+/**
+ * @name    I2C configuration
+ * @{
+ */
+static const i2c_conf_t i2c_config[] = {
+    {
+        .dev = I2C0,
+        .sda_pin = MODULE_PIN_P13,
+        .scl_pin = MODULE_PIN_P12,
+        .loc = I2C_ROUTELOC0_SDALOC_LOC16 |
+               I2C_ROUTELOC0_SCLLOC_LOC14,
+        .cmu = cmuClock_I2C0,
+        .irq = I2C0_IRQn
+    }
+};
+
+#define I2C_NUMOF           PERIPH_NUMOF(i2c_config)
+#define I2C_0_ISR           isr_i2c0
+/** @} */
+
+/**
+ * @brief   RTC configuration
+ */
+#define RTC_NUMOF           (1U)
+
+/**
+ * @name    RTT configuration
+ * @{
+ */
+#define RTT_NUMOF           (1U)
+
+#define RTT_MAX_VALUE       (0xFFFFFFFF)
+#define RTT_FREQUENCY       (1U)
+/** @} */
+
+/**
+ * @name    SPI configuration
+ * @{
+ */
+static const spi_dev_t spi_config[] = {
+    {
+        .dev = USART1,
+        .mosi_pin = MODULE_PIN_F16,
+        .miso_pin = MODULE_PIN_P3,
+        .clk_pin = MODULE_PIN_F15,
+        .loc = USART_ROUTELOC0_RXLOC_LOC11 |
+               USART_ROUTELOC0_TXLOC_LOC11 |
+               USART_ROUTELOC0_CLKLOC_LOC11,
+        .cmu = cmuClock_USART1,
+        .irq = USART1_RX_IRQn
+    }
+};
+
+#define SPI_NUMOF           PERIPH_NUMOF(spi_config)
+/** @} */
+
+/**
+ * @name    Timer configuration
+ *
+ * The implementation uses two timers in cascade mode.
+ * @{
+ */
+static const timer_conf_t timer_config[] = {
+    {
+        {
+            .dev = TIMER0,
+            .cmu = cmuClock_TIMER0
+        },
+        {
+            .dev = TIMER1,
+            .cmu = cmuClock_TIMER1
+        },
+        .irq = TIMER1_IRQn
+    }
+};
+
+#define TIMER_NUMOF         PERIPH_NUMOF(timer_config)
+#define TIMER_0_ISR         isr_timer1
+/** @} */
+
+/**
+ * @name    UART configuration
+ * @{
+ */
+static const uart_conf_t uart_config[] = {
+    {
+        .dev = USART0,
+        .rx_pin = MODULE_PIN_F7,
+        .tx_pin = MODULE_PIN_F6,
+        .loc = USART_ROUTELOC0_RXLOC_LOC0 |
+               USART_ROUTELOC0_TXLOC_LOC0,
+        .cmu = cmuClock_USART0,
+        .irq = USART0_RX_IRQn
+    }
+};
+
+#define UART_NUMOF          PERIPH_NUMOF(uart_config)
+#define UART_0_ISR_RX       isr_usart0_rx
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* PERIPH_CONF_H */
+/** @} */

boards/slwstk6000b/module-info.mk

+# Define the default board module.
+BOARD_MODULE ?= slwrb4162a
+
+# Find the header file that should exist if the module is supported.
+MODULE_HEADER = $(wildcard $(RIOTBOARD)/slwstk6000b/modules/$(BOARD_MODULE)/include/board_module.h)
+
+ifeq (,$(MODULE_HEADER))
+  $(error Header file for $(BOARD_MODULE) is missing)
+endif
+
+# Lookup up CPU information using grep.
+MODULE_INFO = $(shell grep $(BOARD_MODULE) $(RIOTBOARD)/slwstk6000b/modules.txt)
+
+ifeq (,$(MODULE_INFO))
+  $(error Unable to read module information for $(BOARD_MODULE))
+endif
+
+# Export variables to use in this build.
+export MODULE_CPU = $(word 2, $(MODULE_INFO))
+export MODULE_JLINK_DEVICE = $(word 3, $(MODULE_INFO))

boards/slwstk6000b/modules.txt

+# This file contains the supported modules by the SLWSTK6000B wireless starter
+# kit. See Silicon Labs website for more information.
+
+# The intended usage is to grep for the exact module name, and split by spaces
+# to get the required information.
+
+# Module - CPU - JLink Device
+slwrb4150a efr32mg1p233f256gm48 efr32mg1pxxxf256
+slwrb4150b efr32mg1p233f256gm48 efr32mg1pxxxf256
+slwrb4151a efr32mg1p232f256gm48 efr32mg1pxxxf256
+slwrb4152a efr32mg1p232f256gm48 efr32mg1pxxxf256
+slwrb4153a efr32mg1p132f256gm48 efr32mg1pxxxf256
+slwrb4154a efr32mg1p732f256gm32 efr32mg1pxxxf256
+slwrb4158a efr32mg13p733f512gm48 efr32mg13p733f512gm48
+slwrb4159a efr32mg13p632f512gm48 efr32mg13p632f512gm48
+slwrb4161a efr32mg12p432f1024gl125 efr32mg12p432f1024gl125
+slwrb4162a efr32mg12p332f1024gl125 efr32mg12p332f1024gl125
+slwrb4163a efr32mg12p433f1024gl125 efr32mg12p433f1024gl125
+slwrb4164a efr32mg12p433f1024gl125 efr32mg12p433f1024gl125
+slwrb4167a efr32mg13p733f512gm48 efr32mg13p733f512gm48
+slwrb4168a efr32mg13p732f512gm48 efr32mg13p732f512gm48
+slwrb4169a efr32mg14p733f256gm48 efr32mg14p733f256gm48
+slwrb4169b efr32mg14p733f256gm48 efr32mg14p733f256gm48
+slwrb4170a efr32mg12p433f1024gm68 efr32mg12p433f1024gm68

boards/slwstk6000b/modules/slwrb4150a/include/board_module.h

+/*
+ * Copyright (C) 2018 Bas Stottelaar <basstottelaar@gmail.com>
+ *
+ * This file is subject to the terms and conditions of the GNU Lesser
+ * General Public License v2.1. See the file LICENSE in the top level
+ * directory for more details.
+ */
+
+/**
+ * @ingroup     boards_slwstk6000b
+ * @{
+ *
+ * @file
+ * @brief       Specific definitions for SLWRB4150A module.
+ *
+ *
+ * @author      Bas Stottelaar <basstottelaar@gmail.com>
+ */
+
+#ifndef BOARD_MODULE_H
+#define BOARD_MODULE_H
+
+#include "periph/gpio.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @name Pins on the SLWRB4150A module.
+ *
+ * @note The pin numbers refer to the board module, not the base board.
+ *
+ * @{
+ */
+#define MODULE_PIN_F0       GPIO_PIN(PF, 1)
+#define MODULE_PIN_F1       GPIO_PIN(PF, 0)
+#define MODULE_PIN_F2       GPIO_PIN(PF, 2)
+#define MODULE_PIN_F3       GPIO_PIN(PF, 3)
+#define MODULE_PIN_F4       GPIO_UNDEF
+#define MODULE_PIN_F5       GPIO_PIN(PA, 5)
+#define MODULE_PIN_F6       GPIO_PIN(PA, 0)
+#define MODULE_PIN_F7       GPIO_PIN(PA, 1)
+#define MODULE_PIN_F8       GPIO_PIN(PA, 2)
+#define MODULE_PIN_F9       GPIO_PIN(PA, 3)
+#define MODULE_PIN_F10      GPIO_PIN(PF, 4)
+#define MODULE_PIN_F11      GPIO_PIN(PF, 5)
+#define MODULE_PIN_F12      GPIO_PIN(PF, 6)
+#define MODULE_PIN_F13      GPIO_PIN(PF, 7)
+#define MODULE_PIN_F14      GPIO_PIN(PD, 15)
+#define MODULE_PIN_F15      GPIO_PIN(PC, 8)
+#define MODULE_PIN_F16      GPIO_PIN(PC, 6)
+#define MODULE_PIN_F17      GPIO_PIN(PD, 15)
+#define MODULE_PIN_F18      GPIO_PIN(PD, 13)
+#define MODULE_PIN_F19      GPIO_PIN(PB, 13)
+#define MODULE_PIN_F20      GPIO_PIN(PB, 12)
+#define MODULE_PIN_F21      GPIO_PIN(PB, 11)
+#define MODULE_PIN_P0       GPIO_PIN(PA, 2)
+#define MODULE_PIN_P1       GPIO_PIN(PC, 6)
+#define MODULE_PIN_P2       GPIO_PIN(PA, 3)
+#define MODULE_PIN_P3       GPIO_PIN(PC, 7)
+#define MODULE_PIN_P4       GPIO_PIN(PF, 6)
+#define MODULE_PIN_P5       GPIO_PIN(PC, 8)
+#define MODULE_PIN_P6       GPIO_PIN(PF, 7)
+#define MODULE_PIN_P7       GPIO_PIN(PC, 9)
+#define MODULE_PIN_P8       GPIO_PIN(PF, 4)
+#define MODULE_PIN_P9       GPIO_PIN(PA, 0)
+#define MODULE_PIN_P10      GPIO_PIN(PF, 3)
+#define MODULE_PIN_P11      GPIO_PIN(PA, 1)
+#define MODULE_PIN_P12      GPIO_PIN(PC, 10)
+#define MODULE_PIN_P13      GPIO_PIN(PC, 11)
+#define MODULE_PIN_P14      GPIO_PIN(PA, 4)
+#define MODULE_PIN_P15      GPIO_UNDEF
+#define MODULE_PIN_P16      GPIO_PIN(PA, 5)
+#define MODULE_PIN_P17      GPIO_UNDEF
+#define MODULE_PIN_P18      GPIO_PIN(PB, 11)
+#define MODULE_PIN_P19      GPIO_UNDEF
+#define MODULE_PIN_P20      GPIO_PIN(PB, 12)
+#define MODULE_PIN_P21      GPIO_UNDEF
+#define MODULE_PIN_P22      GPIO_PIN(PB, 13)
+#define MODULE_PIN_P23      GPIO_UNDEF
+#define MODULE_PIN_P24      GPIO_PIN(PF, 0)
+#define MODULE_PIN_P25      GPIO_UNDEF
+#define MODULE_PIN_P26      GPIO_PIN(PF, 1)
+#define MODULE_PIN_P27      GPIO_UNDEF
+#define MODULE_PIN_P28      GPIO_PIN(PF, 2)
+#define MODULE_PIN_P29      GPIO_UNDEF
+#define MODULE_PIN_P30      GPIO_UNDEF
+#define MODULE_PIN_P31      GPIO_PIN(PD, 13)
+#define MODULE_PIN_P32      GPIO_PIN(PF, 5)
+#define MODULE_PIN_P33      GPIO_PIN(PD, 14)
+#define MODULE_PIN_P34      GPIO_UNDEF
+#define MODULE_PIN_P35      GPIO_PIN(PD, 15)
+#define MODULE_PIN_P36      GPIO_UNDEF
+#define MODULE_PIN_P37      GPIO_PIN(PD, 15)
+#define MODULE_PIN_P38      GPIO_UNDEF
+#define MODULE_PIN_P39      GPIO_UNDEF
+#define MODULE_PIN_P40      GPIO_UNDEF
+#define MODULE_PIN_P41      GPIO_UNDEF
+#define MODULE_PIN_P42      GPIO_UNDEF
+#define MODULE_PIN_P43      GPIO_UNDEF
+#define MODULE_PIN_P44      GPIO_UNDEF
+#define MODULE_PIN_P45      GPIO_UNDEF
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* BOARD_MODULE_H */
+/** @} */

boards/slwstk6000b/modules/slwrb4162a/include/board_module.h

+/*
+ * Copyright (C) 2018 Bas Stottelaar <basstottelaar@gmail.com>
+ *
+ * This file is subject to the terms and conditions of the GNU Lesser
+ * General Public License v2.1. See the file LICENSE in the top level
+ * directory for more details.
+ */
+
+/**
+ * @ingroup     boards_slwstk6000b
+ * @{
+ *
+ * @file
+ * @brief       Specific definitions for SLWRB4162A module.
+ *
+ *
+ * @author      Bas Stottelaar <basstottelaar@gmail.com>
+ */
+
+#ifndef BOARD_MODULE_H
+#define BOARD_MODULE_H
+
+#include "periph/gpio.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @name Pins on the SLWRB4162A module.
+ *
+ * @note The pin numbers refer to the board module, not the base board.
+ *
+ * @{
+ */
+#define MODULE_PIN_F0       GPIO_PIN(PF, 1)
+#define MODULE_PIN_F1       GPIO_PIN(PF, 0)
+#define MODULE_PIN_F2       GPIO_PIN(PF, 2)
+#define MODULE_PIN_F3       GPIO_PIN(PF, 3)
+#define MODULE_PIN_F4       GPIO_UNDEF
+#define MODULE_PIN_F5       GPIO_PIN(PA, 5)
+#define MODULE_PIN_F6       GPIO_PIN(PA, 0)
+#define MODULE_PIN_F7       GPIO_PIN(PA, 1)
+#define MODULE_PIN_F8       GPIO_PIN(PA, 2)
+#define MODULE_PIN_F9       GPIO_PIN(PA, 3)
+#define MODULE_PIN_F10      GPIO_PIN(PF, 4)
+#define MODULE_PIN_F11      GPIO_PIN(PF, 5)
+#define MODULE_PIN_F12      GPIO_PIN(PF, 6)
+#define MODULE_PIN_F13      GPIO_PIN(PF, 7)
+#define MODULE_PIN_F14      GPIO_PIN(PD, 15)
+#define MODULE_PIN_F15      GPIO_PIN(PC, 8)
+#define MODULE_PIN_F16      GPIO_PIN(PC, 6)
+#define MODULE_PIN_F17      GPIO_PIN(PD, 14)
+#define MODULE_PIN_F18      GPIO_PIN(PD, 13)
+#define MODULE_PIN_F19      GPIO_PIN(PB, 12)
+#define MODULE_PIN_F20      GPIO_PIN(PB, 12)
+#define MODULE_PIN_F21      GPIO_PIN(PB, 11)
+#define MODULE_PIN_P0       GPIO_PIN(PD, 8)
+#define MODULE_PIN_P1       GPIO_PIN(PA, 6)
+#define MODULE_PIN_P2       GPIO_PIN(PD, 9)
+#define MODULE_PIN_P3       GPIO_PIN(PA, 7)
+#define MODULE_PIN_P4       GPIO_PIN(PD, 10)
+#define MODULE_PIN_P5       GPIO_PIN(PA, 8)
+#define MODULE_PIN_P6       GPIO_PIN(PD, 11)
+#define MODULE_PIN_P7       GPIO_PIN(PA, 9)
+#define MODULE_PIN_P8       GPIO_PIN(PD, 12)
+#define MODULE_PIN_P9       GPIO_PIN(PB, 6)
+#define MODULE_PIN_P10      GPIO_PIN(PC, 9)
+#define MODULE_PIN_P11      GPIO_PIN(PB, 7)
+#define MODULE_PIN_P12      GPIO_PIN(PC, 10)
+#define MODULE_PIN_P13      GPIO_PIN(PC, 11)
+#define MODULE_PIN_P14      GPIO_PIN(PB, 8)
+#define MODULE_PIN_P15      GPIO_PIN(PB, 9)
+#define MODULE_PIN_P16      GPIO_PIN(PC, 4)
+#define MODULE_PIN_P17      GPIO_PIN(PC, 5)
+#define MODULE_PIN_P18      GPIO_UNDEF
+#define MODULE_PIN_P19      GPIO_UNDEF
+#define MODULE_PIN_P20      GPIO_PIN(PF, 12)
+#define MODULE_PIN_P21      GPIO_PIN(PF, 14)
+#define MODULE_PIN_P22      GPIO_PIN(PF, 15)
+#define MODULE_PIN_P23      GPIO_PIN(PI, 0)
+#define MODULE_PIN_P24      GPIO_PIN(PI, 1)
+#define MODULE_PIN_P25      GPIO_PIN(PI, 2)
+#define MODULE_PIN_P26      GPIO_PIN(PI, 3)
+#define MODULE_PIN_P27      GPIO_PIN(PJ, 14)
+#define MODULE_PIN_P28      GPIO_PIN(PJ, 15)
+#define MODULE_PIN_P29      GPIO_PIN(PK, 0)
+#define MODULE_PIN_P30      GPIO_PIN(PK, 1)
+#define MODULE_PIN_P31      GPIO_PIN(PK, 2)
+#define MODULE_PIN_P32      GPIO_UNDEF
+#define MODULE_PIN_P33      GPIO_PIN(PA, 0)
+#define MODULE_PIN_P34      GPIO_PIN(PA, 1)
+#define MODULE_PIN_P35      GPIO_PIN(PA, 2)
+#define MODULE_PIN_P36      GPIO_PIN(PA, 3)
+#define MODULE_PIN_P37      GPIO_PIN(PB, 10)
+#define MODULE_PIN_P38      GPIO_UNDEF
+#define MODULE_PIN_P39      GPIO_UNDEF
+#define MODULE_PIN_P40      GPIO_UNDEF
+#define MODULE_PIN_P41      GPIO_PIN(PF, 8)
+#define MODULE_PIN_P42      GPIO_PIN(PF, 9)
+#define MODULE_PIN_P43      GPIO_PIN(PF, 10)
+#define MODULE_PIN_P44      GPIO_PIN(PF, 11)
+#define MODULE_PIN_P45      GPIO_PIN(PF, 12)
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* BOARD_MODULE_H */
+/** @} */