The test verifies basic tracing functionallity:
 * that samples are collected by OSv
 * extraction via `trace extract` succeeds
 * `trace summary` shows expected tracepoint names
 * listing via `trace list` shows tracepoints with arguments
 * network packet parsing works

This test is run as part of standard 'make check'.

Note: this single test can be executed as easily as:

 $ scripts/test.py --test tracing_smoke_test

Signed-off-by: Tomasz Grabiec <tgrabiec@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

Since we adveritse use of a system package in README, we should also
recommend the same here.

Signed-off-by: Tomasz Grabiec <tgrabiec@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

It's needed by TCP-related tracing commands, as of now:

 trace.py list --tcpdump
 trace.py tcpdump

Signed-off-by: Tomasz Grabiec <tgrabiec@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

Also, move platform dependent fast dispatch to platform arch code tree(s)

The patching code is a bit more complex than would seem immediately (or
even factually) neccesary. However, depending on cpu, there might be
issues with trying to code patch across cache lines (unaligned).
To be safe, we do it with the old 16-bit jmp + write + finish dance.

[avi: fix up build.mk]

Signed-off-by: Calle Wilund <calle@cloudius-systems.com>
Signed-off-by: Avi Kivity <avi@cloudius-systems.com>

Signed-off-by: Avi Kivity <avi@cloudius-systems.com>

tcpdump port number conversions vary from system to system. Turn of the
conversions to have consistent output which is also simpler to assert
for in tests.

Signed-off-by: Tomasz Grabiec <tgrabiec@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

On python 2.7.5 python complains about struct() not accepting unicode
argument. Fix by adding explicit conversion.

Signed-off-by: Tomasz Grabiec <tgrabiec@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

Signed-off-by: Avi Kivity <avi@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

phys_ptr<T>: unique_ptr<> for physical memory
make_phys_ptr(): allocate and initialize a phys_ptr<>
make_phys_array(): allocate a phys_ptr<> referencing an array

Signed-off-by: Avi Kivity <avi@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

Signed-off-by: Gleb Natapov <gleb@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

If dentry has elevated reference count during unlink (a file is opened
for instance) it is not destroyed and remains in the dentry hash.
As a result unlinked file is still accessible.

Signed-off-by: Gleb Natapov <gleb@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

Signed-off-by: Gleb Natapov <gleb@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

If dentry has elevated reference count during rename (a file is opened
for instance) it is not destroyed and remains in the dentry hash. As a
result old file is accessible by destination path instead of new one.

Signed-off-by: Gleb Natapov <gleb@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

Signed-off-by: Gleb Natapov <gleb@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

If dentry has elevated reference count during rename (a file is opened
for instance) it is not destroyed and still hashed with old path. As a
result renamed file can still be accessed by its old name.

Signed-off-by: Gleb Natapov <gleb@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

Move static variables for alarm and related function to itimer class.
itimer class offers interfaces to implement setitimer/getitimer, so added setitimer/getitimer.
Now alarm rewrite as a just a wrapper function to call setitimer.

Signed-off-by: Takuya ASADA <syuu@cloudius-systems.com>
Signed-off-by: Avi Kivity <avi@cloudius-systems.com>

Signed-off-by: Takuya ASADA <syuu@cloudius-systems.com>
Signed-off-by: Avi Kivity <avi@cloudius-systems.com>

When a small allocation is requested with large alignment, we ignored
the alignment, and as a consequence posix_memalign() or
alloc_phys_contiguous_aligned() could crash when it failed to achieve
the desired alignment. This is not a common case (usually, size >= alignment,
and the new C11 aligned_alloc() even supports only this case), but still
it might happen, and we saw it in cloudius-systems/capstan#75.

When size < alignment, this patch changes the size so we can achieve the
desired alignment. For small alignments, this means setting size=alignment,
so for example to get an alignment of 1024 bytes we need at least 1024-byte
allocation. This is a waste of memory, but as these allocations are rare,
we expect this to be acceptable. For large alignments, e.g., alignment=8192,
we don't need size=alignment but we do need size to be large enough so we'll
use malloc_large() (malloc_large() already supports arbitrarily large
alignments).

This patch also adds test cases to tst-align.so to test alignments larger
than the desired size.

Fixes #271 and cloudius-systems/capstan#75.

Signed-off-by: Nadav Har'El <nyh@cloudius-systems.com>
Signed-off-by: Avi Kivity <avi@cloudius-systems.com>

AHCI spec says cmd_table need to be aligned to 128 bytes, respect it.

AHCI spec does not specify the alignment requirement of _cmd_list and
_recv_fis. To be safe, we align to their size, i.e. 1024 and 256 bytes.

This fixes the issue reported by Roman Shaposhnik.

   $ capstan run -p vbox
   Created instance: i1398297574
   OSv v0.07
   Assertion failed: !(reinterpret_cast<uintptr_t>(ret) & (align - 1))
   (/home/penberg/osv/core/mempool.cc: alloc_phys_contiguous_aligned:
   1378)

   [backtrace]
   0x398316 <memory::alloc_phys_contiguous_aligned(unsigned long,
   unsigned long)+214>
   0x3542bb <ahci::port::setup()+283>
   0x3549ae <ahci::port::port(unsigned int, ahci::hba*)+142>
   0x354a5f <ahci::hba::scan()+111>
   0x354d34 <ahci::hba::hba(pci::device&)+148>
   0x354e07 <ahci::hba::probe(hw::hw_device*)+119>
   0x33e65c
   <hw::driver_manager::register_driver(std::function<hw::hw_driver*
   (hw::hw_device*)>)+188>
   0x33c8c3 <hw::device_manager::for_each_device(std::function<void
   (hw::hw_device*)>)+51>
   0x33e3de <hw::driver_manager::load_all()+78>
   0x20edf5 <do_main_thread(void*)+629>
   0x3ff0a5 <sync+69>
   0x3a3eaa <thread_main_c+26>
   0x361585 <thread_main+7>

Signed-off-by: Asias He <asias@cloudius-systems.com>
Signed-off-by: Avi Kivity <avi@cloudius-systems.com>

Signed-off-by: Avi Kivity <avi@cloudius-systems.com>

There are 2 types of HVM AMIs on Amazon:

1. Windows based that support all instances types
2. Linux based that support instances larger than medium only

Linux based AMIs suit OSv better because their default seciurity
policy exactly fits OSv model (SSH access) and doesn't require
reconfiguration.

Windows based AMIs require default security policy reconfiguration
in order to allow SSH access but from other hand allow running OSv
on free-tier eligible micro instances which is good for enthusiasts
and initial evaluations.

In order to support both options this patch extends release scripts
with ability to choose between Windows and Linux based templates
during AMIs creation.

Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

This reverts commit 532abb89 which makes
Mr. Jenkins unhappy.

Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

The test verifies that:
 * samples are collected by OSv
 * extraction via `trace extract` succeeds
 * `trace summary` shows expected tracepoint names
 * listing via `trace list` shows expected tracepoints
 * network packet parsing works

This test is run as part of standard 'make check'.

Note: this single test can be executed as easily as:

 $ scripts/test.py --test tracing_smoke_test

Signed-off-by: Tomasz Grabiec <tgrabiec@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

The command runs GDB which is very chatty. This will spoil our clean
output of 'make check' once the tracing test is added. Let's hide GDB
output unless it fails or the tracefile is not created.

Signed-off-by: Tomasz Grabiec <tgrabiec@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

The --tcpdump switch enables in-line decoding of net_packet* samples
so that packet content is displayed in human-readable form next to
other samples. This allows to corelate packets with other samples
easily.

Signed-off-by: Tomasz Grabiec <tgrabiec@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

The 'scripts/trace.py pcap-dump' command will process all packet
capturing samples and output a pcap stream. This is the format used by
tcpdump. It can be used together with tcpdump to display packets in
human-readable form like this:

  scripts/trace.py pcap-dump | tcpdump -r - | less

Because pcap stream is often used together with tcpdump, I also
introduce a shorthand for the above:

  scripts/trace.py tcpdump

Signed-off-by: Tomasz Grabiec <tgrabiec@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

There was no way to sniff packets going through OSv's loopback
interface. I faced a need to debug in-guest TCP traffic. Packets are
logged using tracing infrastructure. Packet data is serialized as
sample data up to a limit, which is currently hardcoded to 128 bytes.

To enable capturing of packets just enable tracepoints named:
  - net_packet_loopback
  - net_packet_eth

Raw data can be seen in `trace list` output. Better presentation
methods will be added in the following patches.

This may also become useful when debugging network problems in the
cloud, as we have no ability to run tcpdump on the host there.

Signed-off-by: Tomasz Grabiec <tgrabiec@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

Tracepoint argument which extends 'blob_tag' will be interpreted as a
range of byte-sized values. Storage required to serialize such object
is proportional to its size.

I need it to implement storage-fiendly packet capturing using tracing layer.

It could be also used to capture variable length strings. Current
limit (50 chars) is too short for some paths passed to vfs calls. With
variable-length encoding, we could set a more generous limit.

Signed-off-by: Tomasz Grabiec <tgrabiec@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

If the rcu threads need memory, let them have it, since they will use it
to free even more memory.

Reviewed-by: Glauber Costa <glommer@cloudius-systems.com>
Signed-off-by: Avi Kivity <avi@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

malloc() must wait for memory, and since page table operations can
allocate memory, it must be able to dip into the reserve pool.  free()
should indicate it is a reclaimer.

Reviewed-by: Glauber Costa <glommer@cloudius-systems.com>
Signed-off-by: Avi Kivity <avi@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

We already have a facility that to indicate that a thread is a reclaimer
and should be allowed to allocate reserve memory (since that memory will be
used to free memory).  Extend it to allow indicating that a particular
code section is used to free memory, not the entire thread.

Reviewed-by: Glauber Costa <glommer@cloudius-systems.com>
Signed-off-by: Avi Kivity <avi@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

After the previous patches, when we try to run an executable we cannot
read (e.g., a directory - see issue #94), a "struct error" exception will
be thrown out of osv::run, and nobody will catch it so the user will see
a somewhat-puzzling "uncaught exception" error.

With this patch, we catch the read error exception inside osv::run(), and
when it happens, just return a normal load failure (nullptr). E.g, now
trying to run a directory will result in a normal failure:

   $ scripts/run.py -e /
   OSv v0.07-39-g03feb99
   run_main(): cannot execute /. Powering off.

Fixes #94.

The osv::run() API currently (before this patch, and also after it)
doesn't have any way to say *why* the loading failed - it could have been
that the executable was a directory, that it was not an ELF shared object,
that it was a shared object and didn't have a main - in all cases the
return value is nullptr. In the future this should probably change.

Signed-off-by: Nadav Har'El <nyh@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

read(fileref, ...) and write(fileref, ...), when they notice an error,
currently assert() causing a crash which looks to non-expert users like
an OSv bug. This causes, for example, bug #94, where doing osv::run()
of a directory, instead of an executable, causes such an assertion
failure.

With this patch, these read() and write() will throw an exception
(a struct error) instead of asserting.

This fixes #94, as now the user will see an uncaught exception instead
of buggy-looking assertion failure. In the next patch we'll catch this
exception, so the user won't even see that.

Signed-off-by: Nadav Har'El <nyh@cloudius-systems.com>
Signed-off-by: Pekka Enberg <penberg@cloudius-systems.com>

No longer used.

Signed-off-by: Gleb Natapov <gleb@cloudius-systems.com>

The bug that caused it to be disabled should be fixed now.

Signed-off-by: Gleb Natapov <gleb@cloudius-systems.com>

Now vma_list_mutex is used to protect against races between ARC buffer
mapping by MMU and eviction by ZFS. The problem is that MMU code calls
into ZFS with vma_list_mutex held, so on that path all ZFS related locks
are taken after vma_list_mutex. An attempt to acquire vma_list_mutex
during ARC buffer eviction, while many of the same ZFS locks are already
held, causes deadlock. It was solved by using trylock() and skipping an
eviction if vma_list_mutex cannot be acquired, but it appears that some
mmapped buffers are destroyed not during eviction, but after writeback and
this destruction cannot be delayed. It calls for locking scheme redesign.

This patch introduce arc_lock that have to be held during access to
read_cache. It prevents simultaneous eviction and mapping. arc_lock should
be the most inner lock held on any code path. Code is change to adhere to
this rule. For that the patch replaces ARC_SHARED_BUF flag by new b_mmaped
field. The reason is that access to b_flags field is guarded by hash_lock
and it is impossible to guaranty same order between hash_lock and arc_lock
on all code paths. Dropping the need for hash_lock is a nice solution.

Signed-off-by: Gleb Natapov <gleb@cloudius-systems.com>

Currently page_allocator return a page to a page mapper and the later
populates a pte with it. Sometimes page allocation and pte population
needs to be appear atomic though. For instance in case of a pagecache
we want to prevent page eviction before pte is populated since page
eviction clears pte, but if allocation and mapping is not atomic pte
can be populated with stale data after eviction. With current approach
very wide scoped lock is needed to guaranty atomicity. Moving pte
population into page_allocator allows for much simpler locking.

Signed-off-by: Gleb Natapov <gleb@cloudius-systems.com>

Current code assumes that for the same file and same offset ZFS will
always return same ARC buffer, but this appears to be not the case.
ZFS may create new ARC buffer while an old one is undergoing writeback.
It means that we need to track mapping between file/offset and mmapped
ARC buffer by ourselves. It's exactly what this patch is about. It adds
new kind of cached page that holds pointers to an ARC buffer and stores
them in new read_cache map.

Signed-off-by: Gleb Natapov <gleb@cloudius-systems.com>

Signed-off-by: Gleb Natapov <gleb@cloudius-systems.com>